AR CI00 Series RF Conducted Immunity Systems

Conducted Immunity Systems contain all components necessary to perform conducted immunity testing to the most widely used standards, with the AR CI00401A specifically designed to perform test in accordance with most auto manufacturers. In addition, AR offers amplifiers and test equipment necessary to perform 11452-4 Component Test Methods for electrical disturbance from narrowband radiated electromagnetic energy - harness excitation methods (1 MHz - 3 GHz).

75 Watts, 10 kHz–250 MHz
Complete Testing Solutions to the following standards: EN/IEC 61000-4-6, IEC 60601-1-2, EN 50130-4, EN 61000-6-1/2, EN 55024
Signal Generator Specifications
Frequency range	9 kHz to 1 .2 GHz
resolution	1Hz
Power range	-140 to +13 dBm
resolution	0 .1dB
Modulation	AM, FSK . Pulse, FM, Phase, External Pulse
Power Meter Specifications
Channels	3
Power heads	1
Type	diode
Frequency	10 kHz to 8 GHz
Range	-60 to +20 dBm
RF Solid State Amplifier Specifications
Frequency range	10 kHz to 250 MHz
Power rating	75 Watts minimum
1dB compression	50 Watts minimum
Harmonic Distortion	-20dBc at 50 Watts
Mismatch tolerance	100% of rated power without fold back . Will operate without damage or oscillation with any magnitude of source and load impedance .
Gain	49dB minimum
General
Power	115/230 VAC 50/60 Hz, single phase 16A
Breaker	2 pole, 20A
Cooling	active cooling, air ventilation
Environmental conditions	10°C - 40°C
Dimensions,	50 .3 x 42 .2 x 52 .1 cm 19 .8 x 16 .6 x 21 .7 in
Weight	20 .5 kg (45 lb)