IEC 61000-4-6 RF Conducted Immunity Test Systems

Quick Links

Information

Viewed products

RFCI-IEC-25W RF Conducted Immunity Test System View larger

RFCI-IEC-25 RF Conducted Immunity Test System

New

  • 100 kHz - 250 MHz Frequency Range
  • Turnkey software for IEC 61000-4-6
  • 25 Watt Integrated Amplifier
  • Computer Based System (USB controlled)
  • Self Calibration with CDN, EM Clamp or Injection Probe
  • RF generator, amplifier and RF Voltmeter usable as independent instruments
  • Connections: EUT "Fail", EUT monitoring by external multimeter

More details

Typically In Stock

Request Quote/More Info

Specifications

Supply Voltage100 to 240 VAC 50/60 Hz autoranging
Frequency Range100 kHz to 250 MHz
Standards MetIEC / EN 61000-4-6 -
RF ConnectorBNC, 50 Ohm
Operating Temperature0°C to 40°C
connectorsBNC
Frequency range100 kHz - 250 MHz
Signal level46 dB ±1.5 dB
Output Impedance50 Ohm nom
Resolution0.1 Hz
Dimensions450 x 150 x 480 mm ( 17.7 x 6 x 19 in)
Weight11 kg / 24 lbs
ConnectorsBNC socket, 50 Ω

Test Equipment Description

The RFCI-IEC-25 RF Conducted Immunity Test System generates interferences as defined in IEC / EN 61000-4-6 - Immunity to conducted disturbances, induced by radio-frequency fields. The standard described a test setup, in which can influence these high-frequency interferences without a complicated structure with antennas, field instrumentation and shielded rooms on an EUT. Via coupling networks and coupling clamp’s, sine waves are induced directly into power and signal lines. The EUT keeps its usual place in the installation; the complete unit can be tested in its function.

RFCI-IEC-25 RF Conducted Immunity Test System Software Overview

RFCI-IEC-25 RF Conducted Immunity Test System Features

  • 100 kHz - 250 MHz Frequency Range
  • 25 Watt Integrated Amplifier
  • Computer-based system (controlled by USB)
  • Self-calibration of the test system (generator and CDN)
  • RF-generator, amplifier and RF-voltmeter may as well be used as stand-alone devices
  • Connections: EUT “Fail”, EUT monitoring by external multimeter, e.g. DUT signal
  • Calibration of coupling / decoupling devices and EM clamp is performed automatically
  • Extensive additions like attenuators, calibration kits, etc. deliverable

Associated EMC Test Equipment

9 other products in the same category: