Montena Turn Key Solution for MIL-STD-461 CS101 and RS101 EMC Compliance

Purpose

MIL-STD-461 CS101 specifies the conducted susceptibility test of equipment and subsystem AC and DC input power leads, in the frequency range of 30 Hz to 150 kHz.

MIL-STD-461 RS101 is used to assess the radiated susceptibility of equipment and subsystem enclosures, including electrical cable interfaces, in the frequency range of 30 Hz to 100 kHz.

• Automatic calibration for the full test frequency range
• Automatic configuration of the measurement equipment setting
• Scroll-down menus for selecting test equipment and components
• Frequency sweeping
• Test and calibration reports automatically generated

	EQUIPMENT	REFERENCE	SPECIFICATIONS
Frequency injection	Signal generator	SIG10M	0 to 10 MHz
	Power amplifier	PA20K13A	0 to 300 kHz frequency range
	Coupling transformers	TR250K50A	50 A, for CS101
	Radiating loop	SG12-RS101	30 Hz to 100 kHz, 15 A continuous for RS 101
Test accessories	High power load	VR15-210	Variable resistor to compensate the power current feedback into the amplifier
	Precision resistor	R0.5-200	0.5 Ω 200 W, resistor for calibration
	LISN	LISN50-25	Line impedance stabilization network 50 µH, 20 A
	Field monitoring sensor	SCR4-RS101	Single coil for calibration
Measurement equipment	Current probe	CT10000F	50 A, 1 Hz to 20 MHz
	Oscilloscope	OD2C100M	100 MHz bandwidth, 1 Gs/s, 2 channels
	Software		Management of calibration, settings, tests and reports