10 kHz - 250 MHz RF Amplifiers

Quick Links

Information

Viewed products

IFI M75 10 kHz to 230 MHz, 75 Watt CW RF Amplifier View larger

IFI M75 10 kHz to 230 MHz, 75 Watt CW RF Amplifier

New

  • 75 Watts saturated power
  • 50 Watts minimum linear power (at 1 dB compression)
  • Instantaneous frequency range: 0.01 to 230 MHz
  • Small signal gain: 49 dB
  • Gain control range: > 18 dB
  • Bandpass flatness: ± 1.0 dB (at 1 dB compression)
  • Nominal harmonics: -30 dBc
  • Spurious signals: < -60 dBc
  • Input VSWR: 1.5 : 1
  • Input Impedance: 50 ohms
  • Output Impedance: 50 ohms

More details

In Stock

Request Quote/More Info

PDF Downloads

Test Equipment Description

The IFI M75 is an RF Power Amplifier. Ranging from 0.01 MHz to 230 MHz, with 75 Watts of minimum saturated power, the M75 delivers clean and accurate signal amplification. The IFI M75 10 kHz to 230 MHz, 75 Watt CW RF Amplifier has a bandpass flatness of Tone1.0 dB and nominal harmonics of -30 dBc. The M75''s flat response and low harmonics ensure that equipment under test is not subjected to undesirable fields, which could cause unnecessarily failure

Amplifier monitoring and protection 

  • Unconditionally stable against load mismatches
  • AC fuse protection 

Cooling

  • Fan assisted air cooling 
  • Input: Type BNC located on front panel; 10 dBm maximum input 
  • Output: Type BNC located on front panel 

Electrical power requirements 

  • 115 Volts AC 
  • 50/60 Hz line frequency 
  • Single phase 

Dimensions and weight 

  • Height: 5.25 in. (14 cm) 
  • Width: 19 in. (48 cm) 
  • Depth: 19.5 in. (50 cm) 
  • Can be mounted in a 19 in. (48 cm) wide rack cabinet 
  • Weight: 37.5 lbs. (17 kg) 

Environmental requirements 

  • Operating temperature: 32° to 113° F (0° to 45° C) 
  • Relative humidity (without condensation): 95% 
  • Maximum altitude: 10,000 ft. (3,048 m)  

Associated EMC Test Equipment

26 other products in the same category: