> EMC Test Equipment>RF Power Amplifiers>10 kHz - 400 MHz RF Amplifiers>Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

10 kHz - 400 MHz RF Amplifiers

Quick Links

Information

Viewed products

Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing View larger

Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

Rental

  • 100 Watts CW
  • 4 kHz – 400 MHz
  • Class A
  • Portable
  • Full VSWR–tolerant
  • CE & RoHS Compliant
  • High Efficiency

More details

In Stock

Request Quote

Request Quote/More Info

Specifications

Frequency Range4kHz–400MHz
RF Connector Type N female
GainGAIN (at maximum setting): 50 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum
RF Input Voltage1.0 milliwatt maximum for rated output
Impedance50 ohms
Input100-240 VAC, 50/60Hz, 500 watts
OutputPOWER OUTPUT @ 3dB COMPRESSION: Typical: 125 watts, Minimum: 100 watts POWER OUTPUT @ 1dB COMPRESSION: Typical: 85 watts, Minimum: 75 watts
FlatnessFLATNESS: ±1.0 dB typical, ±1.5 dB maximum
DimensionsWith cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)
WeightWith Cabinet 18.5 kg (41 lbs) Without Cabinet 10.4 kg (23 lbs)

Test Equipment Description

Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

The Amplifier Research 100A400AM20 is a solid-state, self -contained, air-cooled, broadband amplifier designed for applications requiring RF power down to 4kHz, such as for MIL STD 461 CS114 testing. This amplifier, along with ARI BI00400 current injection probe, or probes of similar insertion loss, offers full compliance to all test curves of CS114, including requirements down to 4kHz. Other advantages of this amplifier include an instantaneous bandwidth, high gain, and linearity. Available in a stylish, contemporary cabinet for benchtop use or with cabinet removed for rack mounting.

The Amplifier Research 100A400AM20 includes a front panel gain control which permits the operator to conveniently set the desired output level. The 100A400AM20 is protected from RF input overdrive by a RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm. The RF amplifier stages are protected from overtemperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The front panel indicates the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.

All amplifier control functions and status indications are available remotely through the optional Remotes Package. The Remotes Package includes GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet. The bus interface connector is located on the back panel and positive control of local or remote operation is assured by a Local/Remote switch on the front panel of the amplifier. Also included with the Remotes Package is a safety interlock circuit for use with external safety switch interlocks. This circuit prevents the amplifier from going into operate mode unless the external connection is made. A jumper plug is provided for cases where this functionality is not needed

Associated EMC Test Equipment

29 other products in the same category: