EFT Testing

Quick Links

Information

Viewed products

EM Test EFT 500N5...
Voltage up to 4.8 kV Meets Conducted...

View larger

EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

Condition New

Voltage up to 4.8 kV
Meets Conducted Immunity Standards:
- ANSI/IEEE C62.41
- IEC/EN 61000-4-4
- IEC 60601-1-2
- IEC 61326
- IEC 61850-3
Pulse verification acc. to Edition 3 on each coupling path

The EMC Shop

More details

Typically In Stock

$1,295.00 + Shipping

Rental Period

Order Type

Request Quote/More Info

Send to a friend
Send to a friend
EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator
Voltage up to 4.8 kV
Meets Conducted Immunity Standards:
ANSI/IEEE C62.41
IEC/EN 61000-4-4
IEC 60601-1-2
IEC 61326
IEC 61850-3
Pulse verification acc. to Edition 3 on each coupling path
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Burst (EFT) 5/50 ns Pulse conforms to IEC/EN 61000-4-4
Parameter	Value
Pulse amplitude	200 Volts - 4.8 kV
Burst frequency	0.1 kHz - 1,000 kHz
Polarity	Positive/Negative
Test duration	unlimited
CRO Trigger	15V trigger signal for oscilloscope; burst duration and pulse frequency can be checked
Repetition rate	10 ms - 9,999ms
Rise time	5ns ± 30%
Coupling	1 Phase, 32 Amps, 250VAC, 270 VDC, HV Coax (Direct); L, N and PE via Coupler
Burst time	0.10ms - 999.9ms
Dimensions	19"/3HU
Weight	43 lbs.

Test Equipment Description

Renting the EM Test EFT 500N5:

Click "Add to Cart" above
Shipping Section - Select "Use My Account" - we ship this system freight to keep it upright. Indicate in the Notes section if you'd like us to facilitate shipment or if your logistics team will do so.
Checkout Accordingly
An EMC Shop representative will contact you with shipping estimates or logistics details.

About EM Test EFT 500N5:

As of 2016, the EM Test EFT 500N5 is a top of the line electrical fast transient (EFT/Burst) simulator. A built in single phase coupler capable of 250V AC at 32 amps, any DUT can be hooked up and injected with EFT for evaluation and compliance to IEC 61000-4-4, ANSI C62.41, IEC 60601-1-2 and all other test standards requiring an immunity from electrically fast transients.

The spike frequency can be varied from as low as 100Hz up to 1,000kHz. The EFT 500N5 is capable to generate 10,000 spikes per second or up to 1,000 spikes per burst. Pre-programmed Standard Test routines and a number of selected User Test routines make the EFT 500N5 an optimum standalone solution for both testing during development and final testing of products and sub-assemblies.