EMC Test Equipment

Quick Links

Information

Viewed products

APELC MG10-1C-2700PF Marx Generator View larger

APELC MG10-1C-2700PF Marx Generator

New

  • Ultra-compact 10-stage generator
  • Designed primarily as a high voltage trigger unit
  • It has been demonstrated for high-power RF and Ultra Wide Band radiation
  • Characterized by a sub-ns risetime and;
  • GW peak power levels due to its low inductance design
  • Capable of delivering 150 kV into a matched load
  • 300 kV into an open circuit

More details

Request Quote/More Info

PDF Downloads

Test Equipment Description

The APELC MG10-1C-2700PF is an ultra-compact 10-stage generator designed primarily as a high voltage trigger unit, but has been demonstrated for high-power RF and Ultra Wide Band radiation. This generator is characterized by a sub-ns risetime and GW peak power levels due to its low inductance design. The generator is capable of delivering 150 kV into a matched load, or as much as 300 kV into an open circuit. The generator is designed to deliver 12 J per pulse and has an impedance of approximately 20 Ohm, giving a maximum peak power of approximately 1 GW.

Waveform

Waveform

Measured output pulse waveform into a 50-Ohm cable load at full Marx charge voltage.

SymbolParameterValueUnits
LLength1m
DDiameter7.6cm
WtWeightkg
NNumber of Stages10
VeErected Voltage300kV
VchMaximum Charge Voltage30kV
PmaxMaximum Peak Power (matched load)1GW
CstageCapacitance Per Marx Stage2700nF
CeErected Capacitance270pF
ZsourceSource Impedance20Ohms
RRmaxRepetition Rate200Hz
FWHMFull Width, Half Maximum15ns

Key Paramaters

  • 300 kV open-circuit output voltage 
  • 300 ps risetime 
  • Requires only pressurized air, high-voltage power supply, and suitable trigger source 
  • 1 GW peak power to matched load 

Suggested Peripherals

  • APELC High Voltage Trigger Unit 
  • Inline, coaxial Current Viewing Resistor 
  • APELC integrated pressurized load module 
  • Suitable high voltage trigger source 

System Requirements

  • 0 – 50 kV dc charge voltage 
  • 200 psi dry air source

Associated EMC Test Equipment

30 other products in the same category: