Viewed products
Surge Module Puse 10/700us per IEC/EN...
New
Warning: Last items in stock!
Availability date:
Voltage Rating | AC 110V/220V , ±10%, |
Frequency Range | 50/60Hz±5% |
Standards Met | IEC 61000-4-5 and ITUETSI |
RF Connector | BNC, 5VTTL |
Mains & EUT Connections | 4mm banana plug |
Telecom Surge As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations | |
Parameter | Value |
Test Voltage | 0.2kV–6.0kV,±10% |
Polarity | Positive, Negative or Alternate |
Counter | 1-999 |
Front Time | Voltage: 10us±20%, time to half value: 700us±20%; |
Pulse Duration | 11s-99s (shortest depends on test voltage) |
Output Current | Front time: 5us±20%, time to half value: 320us±20% |
Transfer Impedance | 15ohm, 40ohm (automatic switch) |
Dimensions | 19 inch/6u |
Weight | Approx 15 kg (33 lbs) |
The 3ctest CWS 600T telecom wave surge simulator complies to the 10/700us waveform per IEC 61000-4-5, ITU, GB/T 17626.5 and other surge standards on data lines. CDN's are available for unshielded symmetric or assymetric communication lines. Software can be used to control the surge simulator remotely, make measurements and generate test reports.
Contact The EMC Shop for more information.