EMC Test Equipment

Quick Links

Information

Viewed products

APELC MG20-22C-2000PF Marx Generator View larger

APELC MG20-22C-2000PF Marx Generator

New

  • Megavolt-class Marx Generator
  • Specifically designed to drive low-impedance loads
  • With a 50 kV charge voltage and an 18 Ohm source impedance
  • Generator will deliver a 500 kV
  • 1.1kJ pulse into a matched load
  • With a peak power of more than 12 GW

More details

Request Quote/More Info

PDF Downloads

Test Equipment Description

The APELC MG20-22C-2000PF is a megavolt-class Marx generator specifically designed to drive low-impedance loads. With a 50 kV charge voltage and an 18 Ohm source impedance, this generator will deliver a 500 kV, 1.1kJ pulse into a matched load with a peak power of more than 12 GW. This generator uses a patent-pending low impedance, parallel-switched topology, which makes it well-suited for a wide variety of High Power Microwave applications.

Waveform

Waveform

Measured output pulse waveform into a 50-Ohm cable load at full Marx charge voltage.

SymbolParameterValueUnits
LLength1.52m
DDiameter50cm
WtTotal Weight45.4kg
NNumber of Stages20
VeErected Voltage1000kV
VchMaximum Charge Voltage50kV
PmaxMaximum Peak Power (matched load)>12GW
CstageCapacitance Per Stage44nF
CeErected Capacitance2.2nF
ZsourceSource Impedance18Ohms

Key Paramaters

  • Maximum open circuit voltage: 1 MV 
  • Peak voltage into matched load: 500 kV 
  • Maximum repetition rate: 20 Hz 
  • Energy per pulse: 1.1 kJ

Suggested Peripherals

  • APELC High Voltage Trigger Unit 
  • Inline, coaxial Current Viewing Resistor 
  • APELC Integrated Rapid Capacitor Charging Power Supply 
  • APELC integrated pressurized load module 

System Requirements

  • 0 – 50 kV dc charge voltage 
  • 200 psi dry air source 
  • Suitable high voltage trigger source

Associated EMC Test Equipment

30 other products in the same category: