Bulk Current Injection Test Setup - 400mA Automotive

The EMC Shop stocks equipment systems to give customers immediate capability of bring a bulk current injection test setup in house. Capable of achieving 400mA, the highest test level in the ISO 11452-4 BCI test standard. Technical support, manuals and video overviews are available to shorten the learning curve and get you up and testing efficiently.

Bulk Current Injection Test Setup - 400mA Automotive Includes

• RF generator with built in amp
• Laptop and control software
• BCI probe
• Calibration fixtures
• RF Current monitor
• Attenuator Set
• RF Cable Set
• Termination
• Manual
• Quick Start Guide
• Calibration Certificate

Video: Calibration of BCI Test Setup

Overview of BCI Test Setup

BCI is a method of carrying out immunity tests by inducing disturbance signals directly into the wiring harness by means of a current injection probe. The injection probe is a current transformer through which the wiring harnesses of the device under test (DUT) are passed. Immunity tests are carried out by varying the test severity level and frequency of the induced disturbance.

The following equipment is used:
— ground plane;
— current injection probe(s);
— current measurement probe(s);
— artificial network(s) [AN(s)];
— radio frequency (RF) generator with internal or external modulation capability;
— power amplifier;
— power measuring instrumentation to measure the forward and reverse power;
— current measurement equipment.