EMC Test Equipment

Quick Links

Information

Viewed products

APELC MG40-3C-2700PF Marx Generator

New

  • Mega-volt class Marx generator
  • Originally designed to drive an integrated flash x-ray diode
  • With a maximum 40 kV charge voltage
  • It has an open circuit voltage of 1.6 MV
  • With a source impedance of approximately 70 Ohm
  • An 850 kV pulse has been measured with a 50 Ohm coaxial cable load

More details

Request Quote/More Info

PDF Downloads

Test Equipment Description

The APELC MG40-3C-2700PF is a mega-volt class Marx generator that was originally designed to drive an integrated flash x-ray diode. With a maximum 40 kV charge voltage, this generator has an open circuit voltage of 1.6 MV. With a source impedance of approximately 70 Ohm, an 850 kV pulse has been measured with a 50 Ohm coaxial cable load. This generator has a maximum pulse energy of 260 J and is capable of delivering more than 10 GW of peak power.

Waveform

Waveform

Measured output pulse waveform into a 50-Ohm cable load at full Marx charge voltage.

SymbolParameterValueUnits
LLength1.83m
DDiameter21.6cm
WtWeight115kg
NNumber of Stages40
VeErected Voltage1.6MV
VchMaximum Charge Voltage40kV
PmaxMaximum Peak Power (matched load)10GW
CstageCapacitance Per Marx Stage8.1nF
CeErected Capacitance200pF
ZsourceSource Impedance70Ohms

Key Paramaters

  • 1.6 MV open-circuit output voltage 
  • 3-4 ns risetime 
  • Requires pressurized air, a high-voltage power supply, and a high voltage trigger source 
  • 10 GW peak power 

Suggested Peripherals

  • Dielectric Sciences Coaxial Cable 
  • Inline, Coaxial Current Viewing Resistor 
  • Inline, Capacitive Voltage probe 
  • Integrated APELC Low Power Support Module 
  • External HV Trigger Unit 

System Requirements

  • 200 psi Dry Air Source 
  • High Voltage Power Supply 
  • High Voltage Trigger Source

Associated EMC Test Equipment

30 other products in the same category: