RF Power Line CDN's

Quick Links

Information

Viewed products

Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

Rental

  • 5 power lines
  • Frequency range: 150 kHz to 230 MHz
  • Designed for IEC/EN 61000-4-6
  • AC Voltage: 300V Line to Ground / 520V Line to Line
  • DC Voltage: 400V Line to Ground / 600V Line to Line
  • Max Current 32 Amps
  • Test Voltage: 3.1 kVDC, 2 seconds
  • 4 mm banana sockets

More details

Inquire

Request Quote/More Info

Specifications

Standards MetIEC 61000-4-6
RF ConnectorBNC, 50 Ω
Mains & EUT Connections4 mm, safety (Optional IEC 320 16A)
Current Rating32 Amps Maximum
Common Mode Impedance150 kHz to 26 MHz: 150 Ω ±20 Ω;26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
RF Input VoltageLess than 30 V
Insertion LossGreater than 0.1 dB
Voltage Division Factor10 dB +3 dB / -1 dB
Decoupling of Common Mode DisturbanceGreater than 30 dB
Dimensions6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Weight6.5 kg

Test Equipment Description

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Teseq CDN M532 Features:

  • 5 power lines
  • Frequency range: 150 kHz to 230 MHz
  • Designed for IEC/EN 61000-4-6
  • AC Voltage: 300V Line to Ground / 520V Line to Line
  • DC Voltage: 400V Line to Ground / 600V Line to Line
  • Max Current 32 Amps
  • Test Voltage: 3.1 kVDC, 2 seconds
  • 4 mm banana sockets

Teseq CDN M532 Configurations:

  • CDN M32S - Coupling Decoupling Network for IEC 61000-4-6, type M5, 32 A, 230 MHz (banana), 3xL,N,PE with calibration adapter set in storage case, includes 2x CAL U100B, SAR MA51, SAR M500, SAR M116, A 50-N

Associated EMC Test Equipment

30 other products in the same category: